Structure: It is consist of pot body, agitator, heating jacket, holder and seal device. The material of the body, agitator, seal and electric heating device is all made of stainless steel USU 304. The seal device is in the top of the lid welded on the bracket and installed with speed reducer and motor. The agitator is driven by drive shaft. The heating jacket is provided with an inlet, oil extraction, emptying valve, electric rods etc. over the hole.
Heating Mode: Conduction oil imported to the inter-layer is heated through electrical heating tube as a medium. There are three groups of heating control switches supplied with 380V power adjusted from 0 to 300 degrees arbitrary.As long as the temperature reaches the desired value, it cools down very slowly and takes fifteen to twenty minutes to heat as usual.
1. As per the structure:Tilting-type, Vertical type(Stationary type)
2. As per the heating:Electric heating type, Steam heating type, Gas heating type
3. As per the recipe: With Stirring, Without Stirring
4. As per the sealing method: NO cover type, Flat cover type, Vacuum type
5. Body material: The outer and inner pot is all stainless steel.
6. Pot body with stirring parts: Stirring device is at top center. The reducer output shaft uses looper to connect with propeller shaft so as to take down and clean easily.
7. Stirring speed: 36 round per minute
8. The speed can be designed according to customer requirements.
9. The type of propeller: ordinary type and scraping the bottom type
10. Other accessories: pressure gage, safety valve, pointer thermometer, steam inlet, outlet etc
11. Tilting-type pot body can turn to at most 90 degrees with manual flip.
Note: the working pressure of the jacket, the power of the motor, the power of the heating, the structure of the propeller can be customized according to the special requirements of customers.
We always believe that the achievement of the customer is the achievement of ourselves, only create value for our customers, we have the value of existence. so mutual benefit and win-win cooperation is our basic principle. We adhere to the integrity and responsibility first, provide the perfect quality of products and services to our customer.
We are manufacturer of snack food producing line, our company was set up on 2006, we have cereal candy producing line, snack bar producing line, rice cake producing line, peanut candy producing line, caramel producing line, crispy snack producing line, packing machine, puffing machine, frying machine, mixing machine, transferring machine, etc.
1) Our factory’s history is more than 12 years.
2) We have CE certificate, ISO,BV...etc.
3) Each year,we takes part in a lot of Expos ,for example: FIC, CPHI, API...etc